• phone.png ​206-682-2100
  • mail.png Request a Quote
  • pin.png 1231 S Director St, Seattle WA 98108

Saws

14" 61 cc Power Cutter

Catalog (SKU) Number: MK-EK6101

Stratified Air Scavenging (SAS) sends air flow through the transfer port to push the burned gases through the exhaust outlet recovering 75% of unburned fuel and reducing fuel consumption by 20%. Cyclonic air Intake delivers more air, more efficiently and increases air filter life by discarding 90% of larger debris. Larger surface inverted intake and filter system extends filter life and service intervals. Start capacitor with start support function resulting in significantly less pull start force. Sliding front engine mounts help absorb vibration by detaching when cutting pressure is applied. Smaller hub and drive wheel assembly increases maximum cutting depth to 5-1/8". Multi-ribbed, self tensioning belt is engineered to provide a more consistent transfer of power. Lower noise at 97 dB(A) and smoother idle for continuous operation. Clear primer bulb facilitates fuel delivery to the carburetor for easier cold starts. On-Off choke operation switch on a single lever with touch-stop function for operator convenience. Aluminum guard and wheel pressure plates to reduce overall weight. Clear fuel tank window provides a convenient fuel level indicator. Water pressure control knob for more accurate flow rate adjustments. Vertical filler neck position for conventional refueling operation. Integrated wrench holder.

Request Product Information

Please fill out the form below and we will get back to you as soon as we can.
 
*
*
*
*
*
 
Download Spec Sheet

Related Products

Tip of the Week

Rotary Hammers are an essential tool, when breaking up, building or generally working with concrete. Here are a few uncommon tips and tricks that will help the tool, bit, and operator. Let the weight of the tool do the work for you; pressing the tool with a large amount of force just leads to exhaustion. Routine maintenance prevents early and preventable mechanical failures from occurring; Grease the shank of the bit every time you change it. You can use your rotary hammer as a heavy duty drill by setting it to the “drill only” setting.

“Pacific Industrial Supply has been one of our vendors for years. They are a good group of people to work with.”

Paulette
Morton’s Supply